You are currently viewing Water Leakage in Washing Machine – Common Causes

Water Leakage in Washing Machine – Common Causes

Water spillage in the washing machine is one of the problems that one should never overlook. A water leak even of a small size can cause water damage, slippery floors, mold, and expensive repairs. Being aware of the most frequent causes of washing machine leakage will allow you to recognize the problem in its infancy and do the appropriate thing.

Book: Washing Machine Repair Near Me

1. Damaged or Loose Hoses

A loose or cracked water hose is one of the most common causes of leakage of water. Washing machines have hoses, which receive water from the inlet and drain water out in a drain hose. Such hoses may wear out or crack or even loosen at the points of connection, over time.

Solution:

Make sure that all hose connections are checked and tightened. In case you can see some cracks or damage, change the hose at once.

2. Malfunctioning Door Seal (Front-Load Machines)

The front-load washing machines have a rubber door gasket (seal), which makes it impossible to leak water when the machine is running. Leaks around the door area may be caused by dirt accumulation, tears, or wear and tear.

Solution:

Check the rubber seal against the damage and clean it on a regular basis. In case it is ripped, it will have to be replaced.

3. Overloading the Machine

Washing too many clothes in the machine may result in overpressure and overflow of water. The excessive loading also fails to allow spinning correctly, and therefore it can cause spillage of water.

Solution:

It is important to always use the recommended load capacity by the manufacturer.

4. Obstructed or plugged drain pump.

In case lint, coins, or some debris clogged the drain pump or filter, the water may not drain correctly and begin leaking along the bottom of the machine.

Solution:

Wash the drain filter on a regular basis and look after the pump blockage.

5. Detergent Issues

Excessive foam can be formed by the use of either excessive detergent or the incorrect type of detergent. This foam can burst out and look like a leakage of water.

Solution:

Apply the right type of detergent and take the right amount.

6. Fractured Tube or Internal Injury.

It might also happen that the inside tub or water pump is broken, and it will leak at the bottom of the machine. This normally involves professional repair and inspection.

When to Call a Professional

You may not be able to trace the source of the leak, or the leak may persist after simple investigations; then it would only be advisable to call the attention of a professional technician. The problem may cause severe damage to water and increased expenses in repairs.

Final Thoughts

Water seepage in a washing machine may be attributed to minor problems such as loose hoses or extensive internal destruction. Leaks can be avoided with regular checkups and maintenance as well as increasing the life span of your appliances. When the problem continues, consider professional washing machine repair services as a safe and sure way of solving the problem.

Leave a Reply